通用banner
Your current location: Home >> News >> Company news

connect us

Shenyang weidel energy saving equipment co. LTD

Shenyang weidel energy saving equipment co. LTD

Telephone: 13066748717

Machine: 024-31556558

Email address: sywdrjn@163.com

Website: en.sywde.com

Address: door 13, 14, building 5, no. 22-6, hongxing road, yuhong district, shenyang (shenyang wuzhou international industrial expo city)


Requirements for gas storage tank device of screw air compressor

2019-07-26
time

1, screw air compressor maintenance manufacturers to introduce the storage of gas, on the one hand, the system may appear in a short time of gas consumption is greater than the supply of gas contradictions, on the other hand, the air compressor presents problems or other unexpected things (such as power failure) when the temporary emergency;


2. Eliminate or weaken the pulsation of the output airflow of the piston air compressor, stabilize the air source pressure, and ensure the continuous and stable output airflow;


3, provide a larger system capacity, extend the air compressor "start - stop" or "load - unload" cycle, reduce the frequency of electrical equipment and valve switching.


4. Further cool the air, separate from and remove moisture, oil and other impurities in the compressed air, reduce the working load of other post-disposal equipment downstream of the pipe network, and make all kinds of gas-using equipment obtain the required quality of air source; The air storage tank of the small air compressor is also used as the base frame of the compressor body and other accessories.


5. In the gas source system, the gas storage tank is usually installed behind the rear cooler, so as to avoid the gathering of oil vapor and liquid water in the tank, so as to reduce the hidden danger and improve the working effect of other gas source equipment as far as possible; In addition, the lower temperature of the air stored in the tank can also reduce the volume of the body.


In most local places, the air storage tank is installed in front of the boring machine, so that the application of the gas storage tank has a cooling water and pressure stabilizing effect, so that the boring machine load can be reduced, and the air pressure into the boring machine is stable, which is very beneficial to the running of the boring machine.


6, but the gas storage device in front of the boring device also has the following defects: if there is a large amount of condensed water accumulation in the tank, liquid water will flow into the boring device, increasing its operating load.


7. In addition, if the inner wall of the gas storage tank is in a humid environment for a long time, it is easy to rust, which will not only affect the service life of the body, but also cause many adverse effects when the corroded spalling material enters the downstream equipment along with the airflow. In order to prevent the outbreak of the above situation, it is very important to timely discharge the air tank.


If you have any questions, please contact us!

Requirements for gas storage tank device of screw air compressor


label

This article's website:http://en.sywde.com/news/414.html

Last viewed:

Shenyang weidel energy saving equipment co. LTD

Tel: 024-31556558 13066748717

Email address: sywdrjn@163.com

Website: www.sywde.com

Address: door 13, 14, building 5, no. 22-6, hongxing road, yuhong district, shenyang (shenyang wuzhou international industrial expo city)